SUB:- PAPER & BOARD PLANT COMPONENT

DEAR SIR,

                WE ARE PLEASED TO INFORM YOU THAT WE ARE DEALING IN SECOND HAND MACHINE & COMPONENTS OF PAPER & BOARD PLANTS, FOR SALES/PURCHASES, WE ARE OFFERING THE FOLLOWING SECOND HAND MACHINES AND COMPONENETS WHICH ARE IN VERY GOOD CONDITION AND AVAILABLE FOR SALES/DISPOSAL WITH US., AS :-

IT-263     52” FC, 8/9 TON CAPACITY KRAFT PAPER PLANT WITH MOULD-2PC, PRESS-1 SET, CI MG 7FT DIA WITH HOOD, POPE REEL, DRIVE, PUMPS, MOTOR REWINDER

IT-262     7/8 TPD,42”MMFC KRAFT PAPER PLANT,HEAD BOX, WIRE PART, PRESS PART,

                8FT DIA MG, TOUCH ROLL, PLAIN HOOD, REELER, REWINDER, DRIVE, MOTOR,ETC.

IT-JN      IMP. BOARD PLANT 2300MMFC, SS MOULD – 6PC,BABY PRESS, MAIN PRESS – 3,CI DRYERS 4 FTD– 22PC,

CALANDER 7 ROLLS, POPE REEL, DRIVE, REWINDER.

IT-277     30/40 TPD,2450MMFC,WRITING PRINTING &CRAFT PAPER PLANT, SS HEAD BOX, WIRE PART,PRESS PART-2, MS DRYERS 5FTD– 7, MSMG 14FTD, POPE REEL, DRIVE, REWINDER, PUMPS, CC UNIT, PRESSURE SCREEN, PULPER, TDR, ELECTRICAL,ETC.

IT-328     1700MMFC  BOARD PLANT WITH SS MOULD – 6 PC, PRESS PART-3 SETS, CI DRYERS 4FT DIA –13PC, CI MG 10FT DIA – 1PC, CALANDER, POPE REEL, REWINDER, PUMP & MOTORS, PULP SECTION,ETC.

IT-329     25 TPD, 1800MMFC, MF CUM MG PAPER PLANT WITH WIRE PART, SUCTION COUCH ROLL, PRESS PART-2 SET, PRE- DRYERS CI 4FT DIA-6PC, CI MG 1780MMFC X 3000MMDIA , POST DRYERS, CI 4FT DIA –4PC, 6 ROLL CALANDER, POPE REEL, DUPLEX CUTTER, MACHINE IS IN RUNNING CONDITION.

IT-333     WIRE PART 3000MMFC, HEAD BOX 3000MMFC, PRESS PART 500MMDIA X 3000MMFC, MSMG 14FT DIA X 2800MMFC, PULPER, TDR 17” & 21”.

IT-334     55”FC 15/20 TPD PAPER PLANT WITH HEAD BOX, WIRE PART, PRESS PART, 10FT DIA MG, POPE REEL, DRIVES, REWINDER, VACUUM PUMP, REFINER, PRESSURE SCREEN, CENTRICLEANER 1.5 T/H BOILER.

IT-335     10 / 12 TPD, 60”FC BOARD PLANT WITH MOULD, PRESS PART 9FT DIA MG REELER, REWINDER, PULP

SECTION, ELECTRICAL, BOILER IN RUNNING CONDITION.

IT-336     50”FC , 9/ 10 TPD PAPER PLANT WITH MOULD, PRESS PART, 9FT DIA MG, REELER,  DRIVE, REWINDER, PULP SECTION, ELECTRICAL, BOILER,ETC. IN RUNNING.

IT-337     40”FC PAPER PLANT,MOULD,PRESSPART, 8FTD MG,REELER,DRIVE, REWINDER,ETC.

IT-VK     42” FC PAPER MACHINE WITH HEAD BOX, WIRE PART, PRESS PART, 10 FT DIA MG DRIVE, REWINDER,

                52” FC PAPER MACHINE WITH HEAD BOX, WIRE PART, PRESS PART 14FT DIA MG, DRIVE, REWINDER.

                62” FC PAPER MACHINE WITH HEAD BOX, WIRE PART, PRESS PART, CI MG 8 FT DIA, DRIVE, REWINDER.

IT-367     STRAW CUTTER 2300MMFC WITH WIRE PART, PRESS-03NOS, ROLL DIA 450MM, MS DRYERS 4FT DIA –15NOS, CALANDER, POPE REEL, DRIVE UNITS.

IT-369     2800MMDECKLE ,HEAD BOX, SS BREAST ROLL 650MMDIA, TABLE ROLLS  150MMD–15,

SS FOILS –2, FORMING BOARD-1, SS SUCTION BOXES –5,COUCH ROLL780MMDIA

IT-377     30 / 35 TPD, 2300MMFC PAPER PLANT WITH HEAD BOX, WIRE PART, PRESS PART ROLL DIA 600MM,

MSMG 14FT DIA, POPE REEL, DRIVE UNITS,ETC. IN RUNNING CONDITION.

IT-391     2650MMFC BOARD PLANT WIRE MOULD, PRESSES- 3 SET, MS DRYERS 5FT DIA – 14NOS,MSMG 14FT DIA,

                CALANDER, POPE REEL, DRIVE, CUTTER, REWINDER.

IT-392     SARVALL (PMP) MAKE2600 / 2700MMFC, WIRE PART WITH SS HEAD BOX WITH SS MANIFOLD, WIRE WIDTH

                2800MM & LENGTH 24MTR, SS CLEDDED FRAME, CANTILEVER SYSTEM, FORMING BOARD,TABLE ROLLS

                SS FOILS, SS VACUUM BOXES, AUTOGUIDE, SHAKING, BAGLE BOX, SS DANDY ROLL 600MMDIA, DOCTORS

                SS SHAWERS & SS TRAY, COUCH ROLL DIA 800MM, SOLE PLATE, COUCH PIT AGITATOR, DRIVE ETC.

                HIGH VELOCITY HOOD SUITABLE SIZE FOR 2700MMFC & 12 FT DIA WITH ALL ACCESSORIES SONAR MAKE

IT-399     80 / 100 TPD CAPACITY DUPLEX BOARD PLANT, 2800MMFC WITH SS FORMERS-5, SS MOULD-3, BABY PRESS –1, MAIN PRESS ROLL DIA,600 X 800 X 600MM, CI DRYERS 5FT DIA-16PC,CI DRYERS 4FT DIA-5, MSMG 16 FT DIA, COATER- 2 SET, CALANDER – 2 SET, CUTTER –2, REWINDER –2, COMPLETE PULP MILL, ELECTRIC, TRANSFORMER 1500KVA-2,

15 TPH THERMEX BOILER, DEINKING PLANT.

IT- 401    1850MMFC PAPER PLANT HB, WIRE PART, PRESS PART-2, DRYER 5FT DIA –8, MG 8 FT DIA, CALANDER, POPE REEL, DRIVE, PUMP, VACCUM PUMP, PRESSURE SCREEN, CC UNIT, CUTTER, REWINDER ETC COMPLETE.

IT- DP    3200MMFC, SS HEAD BOX, PRESS PART, MS DRYERS 1500MM DIA –9NO, MSMG 14 FT DIA, HOOD,ETC.

IT-411     SS HEAD BOX OPEN TYPE 3000MMFC, PRESS PART ROLL DIA 600  X 3100MMFC, TOP ABONITE AND

BOTTOM RUBBER- 2 SET, WIRE PART 3000MMFC – 01NO, 2500MMFC –2NO,DUPLEX CUTTER 3000MMFC –02NO,

REWINDER 3000MMFC –2NOS AND 4000MMFC –01NO,PRESSURE SCREEN 600MM SIZE, VACUUM PUMP 600KVM –8,

300KVM 3, FN SCREEN-01NO, PULPER CI 8M3, COMPLETE PAPER PLANT 3900MMFC WITH SS HEAD BOX,

WIRE PART, PRESS PART, CI DRYERS 4FT DIA, CALANDER, POPE REEL, ETC IN RUNNING CONDITION.

IT-412     VOITH AUSTRIA MAKE DECKLE 3840MM, SPEED 50-300 M/MN, 125TPD CAPACITY, FIBRE RECYCLED PAPER,

                SS HEAD BOX CLOSED TYPE, HOLLY ROLL –5PC, WIDTH 4105MM, WIRE PART, BREAST ROLL DIA 700MM,

SUCTION, COUCH ROLL 520MM, SS FLAT BOXES –6, SS HYDRA FOILS –8,WIRE ROLL – 13NOS, AUTO GUIDE, STRECHER, SHOWER, SS TRAY,PRESS PART, SUCTION PRESS ROLL 800MM DIA X 4390MM, PRESS TOP ROLL 80MM DIA X 4200MMFC, II & III PRESS 650MM DIA X 4140MM, DRYERS 1800MM DIA –22NOS, MG DIA 420MM, FACE 4200MM, TOUCH ROLL 700 X 4130MM, POPE REEL, DRIVE WORD LEONARD, 294KW, 780, 1400RPM, REWINDER

IT-413     TURBINE GERMONY MAKE 2250 KW, 2825KVA, 2500KW, 3125KVA WIDTH, 30 TPH BOILER

IT-414     REWINDER 70” FC, POCHER DRUM 2000 X 2000, PULPER 8 & 6M3, FOUR ROLLS CALANDER SET 70”FC

                ROLL DIA 400, 350,350,350MM, 6 ROLLS CALANDER 2000MMFC, ROLL DIA 500, 350, 250,250,250,250

                PRESS ROLL 500MM DIA X 2400MMFC –02NO, 60” SIZE POPE REEL, PULP PUMP 8 X 6, 5 X 6, AGITATORS

FIBRE RECOVERY PLANT   

IT- 45    KROFTA SAVE ALL MODEL DAF-300,300M3/MN CAP, CHANDIGARH MAKE

IT-177   KROFTA PLANT SP-8 MODEL , CHANDIGARH MAKE

PULPER                IT- 108  8M3PULP., SS COATED

IT-120   IMP.DR HYDRAPULPER 150TPD, BROKE PULPER-180TPD IT-260         PULPER 8M3

IT-270     HYDRA PULPER 25M3 & 8M3 CAPACITY. IT-374 BROKE PULPER 5M3             IT-15   8M3 HYDRA PULPER IT-354               SS PULPER 5M3        IT-348    HIGH CONSISTENCY PULPER 12M3

IT-405     HIGH CY PULPER – 2NOS (PMP DIGESTOR)

PRESSURE SCREEN, HD CLEANER,  THICKNER & CENTRICLEANERS

IT-13A  SS POCHER DRUM 2000X1500 MM FC WITH BRG&HSG

IT-95    PR. SC. 405X405 MM, SS DRUM,1.8 MM HOLE, CI BODY, MANCO, 25/30 TPD-2 PC

IT-120  IMP. HORIZONTAL SCREEN 100/150 TPD, IT-276 SHAPPER PLAST 50 TPD , PRESSURE

            SCREEN 500MM & 400MM SIZE  IT-360          WASHING POCHER DRUM 2000MM DIA X 1350MMFC WIDTH.

IT-125  IMP. VOITH HD CLEANER 1200 L/M, 30/40 TPD  IT- 45 PR. SCREEN500X500, SWAROOP

IT-177  2X1MTR SIZE-2PC THICKNER, IMP. FN SCREEN 40/50 TPD SS SLOTTED 0.15MM SIZE , 40/50 TPD CAP.

IT- 173 PRE. SCREEN 30/40 TPD IT-15/118 PR. SCREEN 400 X 400 & 450C450MMSIZE

IT- 173 THICKNER 2 X 1 MT - 6PC., SS WASHERS IT JP    PULP SCREW PRESS - 40 TPD .

IT-185  PRESSURE SCREEN 500 X 500MM IT-177 THICKNER 4 FT DIA X 2 ¼ FC-2PC

IT-235     SHAPPER PLAST 30/50 TPD CAP, 30HP DC MOTOR .IT-260 B2 THICKNER 1 X 4 M

IT-276     CUBE SCREEN 60 TPD WITH IMP. SLOTTED 0.128MM BASKET WITH 40 HP MOTOR

IT-181     IMP. PRESSURE SCREEN 400MM SIZE GEAR DRIVE. IT-338  PRESSURE SCREEN 400MMDIA

IT-285     PRESSURE SCREEN 500 & 600MM SIZE, HD CLEANER 1000 LPM

IT-294     500MM PRESSURE SCREEN IT-301 FN SCREEN  RUBY, SS BASKET 1. 0 MM HOLE.

IT-304     THICKNER 1500MMD X 1250MMFC –1,THICKNER DRUM 1250MMDIA X 4000MMFC –1

IT-320     IMP. PRESSURE SCREEN 600X 0.3 MM SLOTTED BASKET

IT-349     REJECT SCREEN MACHNO PERFORATION PLATE SIZE 820 X 2110MM PERFORATION SIZE 1.8

MM DIA IN SS CONSTRUCTION COMPLETE.            IT-108     COWAN SCREEN

IT-89 CC SS BOTTLES- 9IT-142  CC BOTTLES SS 1000L/M–5IT-268 30/40 CENTRICLEANER SET

IT-276     SS CENTRICLEANER SET 750L/MN BOTTOLES, 12 + 3+ 1 = 16 BOTTLES.

IT-285     SS CENTRICLEANER BOTTLES WITH HEADERS 1000LPM –8PC.  

IT-349     THREE STAGE SS CENTRICLEANERS 10 +4+2 BOTTLES

                L & T MAKE CONTAMINEX MODEL CMC –10, SIZE –10

IT-305     CENTRIFUGAL SCREEN PRIMARY, SECONDARY, TERTIARY VOITH MAKE 3-2-2 NOS.

CENTRICLEANER PRIMARY, SECONDARY, TERTIARY VOITH DESIGN – 12- 4 - 5 TUBES.

IT-363     PRESSURE SCREEN 500 X 500MM SIZE.         IT-374  POWER SCREEN SLOTTED BASKET

IT-381     FIBRO TYPE 3 STAGE CENTRICLEANER 60 TPD CAPACITY WITH SS BOTTOLES, SS HD CLEANER,

                CANTIMINEX IN SS

DEINKING PLANT 

IT-21       IMP.25 TPD,SS DEINKINGPLANT. IT-199   L & T, MS CONSTRUCTION DEINKING PLANT 25 TPD. 

IT-350     SCAN MAKE SS DEINKING PLANT 25 / 30 TPD. IT-101 50 TPD L & T MAKE

DIGESTOR  & BLOW TANK

IT-40      DIGESTOR NEW & UNUSED 12 FT DIA HONEST IT-66 DIGESTOR. 12 FT DIA -1PC 

IT-226     DIGESTOR 14FT DIA-3PC. IT – JP STRAW CUTTER 3 TON CAPACITY

IT-21 DIGESTOR 12FT D-2. IT-299 DIGESTOR 14FT DIA –4, 16FT DIA –1PC, BLOW TANK 120 M3

IT-345     DIGEST DIA 12.6 – 2 NOS. IT- 381A               DIGESTOR 12 FT DIA – 04 NO.

IT-362     12FT DIA DIGESTOR –05NOS., DIGESTOR HOIST, DIGESTOR SABAI GRASS

IT-405     DIGESTOR 14FT DIA – 1NO,LYE MIXTURE FOR DIGESTOR- 1NO

IT-408     14FT DIA DIGESTOR –01PC

STRAW CUTTER & RAG CUTTER                              

IT- JP STRAW CUTTER 3 TON IT-171  STRAW CUTTER 3T/HR -2SET,

IT-66A  BRAMCO,STRAW CUTTER  & DUSTCOLLECTOR

IT-362     STRAW CUTTER, DUSTER, CONVEYOR

BEATERS

IT- 66A 500KG CAP.BEATER -2. IT-30D BEATER-300 KG CAP -2 IT-247    BEATER 500KG-4PC.

IT -95     BREAKER, MANCO 500 KG CAP.  IT-283 500KG BEATERS –8PC.   

REFINER      IT-279            18” DISC REFINER IT-351 SERVALL MAKE 18” SIZE DDR –2NO.

IT- 95   CONICAL REF. R-1 TYPE,IT -7 15”DDR  IT JP    SDR -.21” 

IT-170  R-1 TYPE CONICAL REFINER -2PC. IT-279     18” DISC REFINER

IT - JP  SINGLE DISC REFINER 17”-4,IMP.DDR21” 150HP MOTOR.  IT 228    SDR 13”

            IMP-2R REFINER WITH 250HP MOTOR, VOITH MAKE- 2R REFINER

IT 178 DDR NEW-4T/HR,REFINATOR,CONICAL REF,IT- 178 DEFLEKAR - 800/1000L/M CAP-2

IT-194  SDR - 24”-2PC    IT-147     R-1TYPE REFINER –5      IT-326     TDR PARASON 21”

IT-210     SDR-23”, PARASON TDR 17” . IT-227           SDR-17”1PC.  IT-390          TDR 21” SIZE

IT –220 VOITHDISC REFINER, 755MMDISC, CONICAL REFINER R-2 TYPE – 2NOS.  

IT-269     R-1 TYPE REFINER     IT-SJ     DD REFINER      IT-102     S. DISC REFINER -21,  

IT-299     SDR 580MM SIZE, DDR 15” SIZE  IT-304 CONICAL REFINER 35 TPD –1PC.

IT- 390    TDR 21” SIZE – 2NOS.       IT-395    SDR- 2NOS.

TERBO SEPERATOR, DEFLEKAR, SEPRO -PLAST:-

IT-304     TURBO T-300-3PC, T-400 –2PC.

IT-66A  TURBO SEPRATOR RUBY T-400 & T- 300 IT-216   IMP. VOITH,DEFLAKER 55KW MOTOR COMBINE

IT-269 ESCHER WYSS MAKE DEFLECKER 2900RPM , 100HP DTE IT-338 TURBO 500

IT-227     TURBO T-300, 400, 500 IT-169  20TPD DEFLACKER. IT- 235  SAPPER PLAST

IT-237     SS CLEDED TURBO SEPRETOR T-600 IT- 285  TURBO T-500  IT-279    IMP. DEFLECKER

IT-331     3 F SCREEN J K MAKE, DEFLECKER –2E, SANDY HILL MAKE THICKNER 48” X 144”

PULP SCREW PRESS :-

IT-JP  NEW PULP SCREW PRESS 30/40 TPD - 1PC,  IT-108   IMP. SS SCREW PRESS 80TPD & SS BLEACH CONVEYOR.

JONSON SCREEN

IT -90     JOHSON SCREEN 1M3 - 2 PC    IT-244            JOHNSON SCREEN 1:1.5MTR SIZE

IT-381A SS JOHNSON SCREE 1.5M3 CAPACITY

IT-405     JOHNSON SCREEN – 3NOS,SDR ( DISC DIA 580MM ) – 3 NO

HEAD BOX 

IT-267     SS HEAD BOX 2800MM  IT-15        48” HEAD BOX  IT-170 2117 MS H.BOX ,SS SLICE, HOLLY ROLLS AND HEADERS

IT-168   1800FC SS&2100MFC MS HEAD BOX IT- 173 H. BOX SS & MS2600MMFC

IT-186 SS H. BOX OPEN, ONE HOLLEY ROLLS, DISTRIBUTION PIPES 2300 MMFC 

IT-JP IMP. HEAD BOX 2600FC SS CLADED IT-343  HEAD BOX 2900MMFC. IT-299   H. BOX 299 SS H, BOX 2450MMFC

IT-217MS HEAD BOX 53”FC.                           IT-260 SS HEAD BOX 2219MMFC

IT- 183    SS HEAD BOX 3000 MMFC WITH 2 HOLLEY ROLLS MICRO MANIFOLD COMPLETE.

IT-206 SS HEAD BOX 3700/3800MMFC PANCHAL MAKE.

IT-338     2000MMFC HEAD BOX, 2300MMFC PRESSURISED HEAD BOX

IT- 389    NEW SS PRESSURISED HEAD BOX 2600MMFC

WIRE PART      

IT-299     WIRE PART BEAM WITH WIRE RETURN ROLL SUITABLE FOR 23.6 X 2650MM SIZE.

BREAST ROLL  

IT-267 BREAST ROLL 500 X 2800   IT-343     BREAST ROLL 377 X 2300

IT-359     BREAST ROLL 350MMDIA X 3000MMFC IN BRONZE

SUCTION COUCH ROLL & DANDY ROLLS

IT -90   IMP SUCTION COUCH ROLL 560 MM DIA X 3000 MM FC WITH BRG & HSG

            IMP SUCTION COUCH ROLL 600 MM DIA X 2445 MM FC WITH BRG & HSG

IT-215 COUCH ROLL 600MMDIA X 2350FC  IT-268 600X2100 COUCH ROLL & 600 X 2700

IT-143   SUCTION COUCH ROLL 560 MM DIA X 3045MMFACE/ 2740 MM DRILL FACE SET                  

IT- 176  SWILL MAKE SS & BRONZE DANDY ROLL 700MMDIA X 3700MMFC- 2PC

IT-190     NEW COUCH ROLL WITH BRG HSG SIZE 900MMDIA X 2750MMFC WITH GEAR BOX

IT- 180  IMP.SUCTION COUCH ROLL 900MMDIA X 3700MMFC AND 600MMDIA X 2100MMFC

IT-142     IMP. SUCTION COUCH ROLL 500MMDIA X 2560MMDRILLED,2980MMFC,6MM HOLE

IT- 120    SUCTION RETURN ROLLS 30” DIA X 2600MMFC WITH BRG HSG

IT-286    DANDY ROLL 600MMDIA X 2750MMFC

IT-295     SUCTION COUCH ROLL 800MM DIA X 4100 / 4400MMFC

IT-307     DANDY ROLL 500MMDIA X 2870MMFC –2PC.

IT-JP       DANDY ROLL 650MMDIA X 3760MMFC –03NOS.

IT-374     COUCH ROLL 710MMDIA X 60MMFC, SUCTION COUCH ROLL 560MMDIA X 2740/3045MMFC-1

IT- 389    COUCH ROLL 530MM DIA X 2650MMFC

IT- 402    COUCH ROLL 650MMDIA X 2230MMFC –01NO.

PRESS PART

IT-21A  PRESS  ROLL TOP GRANITE, STONITE, ABONITE & BOTTOM COATED                        

             500 MM DIA X 2580 MMFACE WITH FRAMES  PNEUMATIC ETC-4 SET

IT-JP    IMP. PRESS ROLL 520MMDIA X 3280MMFC   IT- 174 PRESSPART450DX65”FC ROLL

IT-143  IMP. SUCTION PRESS 2915MMFC,2730DRILLED FC, 605MMD WITH BRG & HSG

            IMP. SIZE PRESS 400MM DIA INCLIEND 2540MMFC,WITH FRAME ETC.

            IMP. PRESS SET TOP GRANITE,BOTTOM RUBBER 580MMDX2800MMFC BRG &HSG

IT- 268 500X2065 PRESS ROLLS-2       IT-JP PRESS PART 500DX2800MMFC-3

IT-170  SQUEEZE PRESS ROLL RUBBER COATED 250MM DIA X 2100MM FC -2PC.

             * PRESS ROLL TOP MICRO & BOTTOM RUBBER 430MM DIA X 2100MMFC

IT-185     COMPLETE PRESS SET 450MMDIA X 2400MMFC WITH TOP & BOTTOM ROLL WITH      

              BRG & HSG , FRAME PNEUMATIC LOADING & UNLOADING - 2

IT- 123 PRESS ROLL 600MMDIA X 2980MMFC  ,PRESS ROLL 590MMDIA X 2905MMFC

IT- 180  IMP SUCTION PRESS ROLL 540DX3716MMFC  IT-208SUCTION PRESS ROLL3000 X 600MMDIA,40MMCELL

IT-181   PRESS ROLL, FRAME PNEUMATIC CYLINDER 380MMDIA X 1900MMFC TOP MICRO  

BOTTOM RUBBER.- 2SETS, 100% SYN.PRESS FELT, DINESH MILL 1.9X12.0M,850GSM

IT-246     PRESS PART 2600MMFC X 500MMDIA COMPLETE  2 SETS.

IT-120     BLIND DRILLED PRESS ROLL SET WITH BRG & HSG 600MM DIA X 2700MMFC –2

IT-294     PRESS PART COMPLETE 450MMDIA X 2400MMFC –1 SET IT-320  PRESS ROLL 500MMDIA X 2300MMFC –2PC.

IT-295     SUCTION PRESS ROLL 650MMDIA X 4225/ 4600MMFC-2PC, TOP ROLL GRANITE  650MMDIA X 4200MMFC –3PC.

IT-JP       IMP. SUCTION PRESS ROLL 700MMDIA X 3330 / 3500MMFC COMPLETE SET

IMP. PRESS TOP ROLL GRANITE 700MMDIA X 3500MMFC –1PC, 600MMDIA X 3500MMFC –2PC.

IT-323     PRESS ROLL 450MMDIA X 86”FC –4PC. IT-338         PRESS ROLL 400 X 2100MM

IT-343     PRESS ROLL 470MM X 2200, 480 X 2200, 502 X 2200, 448 X 2200, 545 X 2000, TOUCH ROLL 465 X 2000 

IT-344     SUCTION PRESS ROLL 600 X 2900, PRESS TOP ABONITE 500 X 2900.

IT-353     PRESS PART ROLL DIA 600MM X 1900MMFC

IT-354     BABY PRESS 230MMDIA X 2300MMFC – 2 SETS, PRESS ROLL 430MMDIA X 2300MMFC –3NO.

IT-359     PRESS GRANITE ROLL 550MMDIA X 3000MMFC –3 NOS., BOTTOM PRESS RUBBER ROLL 550 X 3000-3

                PRESS TOP MICRO ROLL 450 X 3500MM –1NO. PRESS BOTTOM RUBBER ROLL 450 X 3500MM -1

IT-360     BOTTOM ( RUBBER ) PRESS ROLL 550MMDIA X 2800MMFC-1

                TOP PRESS ROLL 523 MM X 2845MMFC-1

IT-363     PRESS ROLL 460 MMDIA X 2400MMFC –05NOS.

IT-368     PRESS ROLL 500MMDIA X 2800MMFC WITH BRG / HSG –2NO

IT-374     PRESS ROLL 610MMDIA X 60”FC, TOP ABONITE BOTTOM RUBBER WITH ALL ACCESSORIES-2,

SUCTION PRESS ROLL605MMDIA X 2730/2915MMFC, PRESS ROLL TOP GRANITE & BOTTOM RUBBER 600MMDIA X 2600MMFC –4NO.

IT-381     TOP & BOTTOM BLIND DRILLED,PRESS ROLL 525MM DIA  2800MMFC WITH BRG HSG,

IT-382     PRESS ROLL, TOP ABONITE & BOTTOM RUBBER 500MMDIA X 2250MMFC WITH BRG HSG-4NOS.

IT-402     PRESS ROLL 420MMDIA X 2230MMFC – 4NO.

IT-381     PRESS BOTTOM & TOP ROLL 525MM DIAX 2850MMFC –2NO.

IT-404     IMP. SUCTION COUCH ROLL 800MMDIA X 4365MMFC –1 NO

IT-404     PRESS RUBBER COATED ROLL 800MM DIA X 4300MMFC – 3NO.

IT-405     TOUCH ROLL 685MMDIA X 4355MMFC –1,DEPITHER FOR BAGASSE –1NO

IT-406     IMP. SCREW PRESS VI – 45, LAMORT MAKE 60 / 65 TPD, SS BODY, GEAR BOX .

DRYERS

IT-30A    MS DRYER 4FTDX 60“ FACE - 14PC IT-201   CI DR 1250DX 2050MMFC-5 

IT-208       CI DRY.4FTDX2800MMFCWITH BRG & HSG- 20, IT-180 CI DRY.1250DX3470MMFC -7

IT-171     IMP. FELT DRYERS 930MM D X 2550MM FC WITH FRAME BRG & HSG - 3PC.

IT- 174    MS DRYERS 5FTD X 70”FC - 3PC, IT-126   CI DRYERS 1250MMDIA X 2300MMFC -2

IT-199     IMP. CI DRYERS 4FT DIA X 2700MMFC WITH BRG HSG,GEAR ,FRAME,ETC.-10

IT-328     CI DRYERS 4FT DIA X 65”FC –8PC. IT-246    CI DRYERS 1480MMDIA X 2600MMFC WITH BRG HSG – 5PC.

IT-279     MS DRY.1500MMD X 2400FC– 6., 1500MMDIA X2300MMFC –14 .

IT- 271    IMP. CI DRYERS 1500MMDIA X 4000MMFC WITH ALL ACCESSORIES – 12PC.

IT-JN      1200MM DIA X 2200MMFC – 4PC. IT-JP MS DRYER 5FT DIA X 55” FC – 2PC.

IT-120     CI DRYERS 4 FT DIA X 2700MMFC – 4PC., 4FT DIA X 2500MMFC – 2PC.

IT-295     CI DRYERS 4FT DIA X 2700MMFC WITH ALL ACCESSORIES – 20PC.

IT-304     MS DRYERS 1250MMDIA X 2300MMFC –1 PC., 750MMDIA X 2300MMFC –1PC.

IT-330     DRYER CI 1000MMD X 2400MMFC – 2, 1250MMD X 3225MMFC –5, 800MMD X 3225MMFC-1,

800MMD X 2400MMFC –2, IT-353 CI DRYERS 4FT DIA X 2500MMFC –13NO.

IT-348     BRAND NEW CI DRYERS 1500MMDIA X 2500MMFC WITH FRAME AND HOUSING –15NOS.

IT-371     M.S. DRYERS 4FT DIA X 50”FC –6 WITH BRG /HSG, GEAR WHEEL

IT-381     BABY DRYER 800MMDIA, 2800MMFC-2PC

IT-374     CI DRYERS 4FT DIA X 56MMFC WITH ALL ACCESSORIES –11NO., CI DRYERS 4 ½  FT DIA X 3175MMFC-4, DRYERS CI GEAR WHEEL –10NOS, IT- 398 CI DRYERS 2650MMFC X 1500MMDIA –8 NOS.

IT-403     MS DRYERS 1500MM DIA X 2750MMFC – 11NO.

IT- ST     IMP. CI DRYERS 1500MMDIA X 3400MMFC, 3550 WITH ROPE –6 WITH ALL ACCESSORIES

                IMP. CI DRYERS 1220MM DIA X 2000MMFC – 18PC.

IT-409     CI DRYERS 5 FT DIAX 3500MMFC –08PC, CI DRYERS 4FT DIA 78”FC

IT-415     CI DRYERS 1372MMDIA X 2660MMFC –05NO, 1220MM DIA , 2190MMFC –01NO, 2550MMFC, DUPLEX CUTTER

                THUMB ROLL 1900MMFC X 215MMDIA 16NOS.

MG CYLINDER

IT-7         MG 8FTDX72”FC ,CELL THICKNESS 40MM, TWO TOUCH ROLLS. IT-323    TOUCH ROLL 450 X 86”

IT-328     CI MG 10FT DIA X 2500MMFC IT- 400         MSMG 12FT DIA X 2400MMF

IT-207     IMP. CI MG 12 FTDX2750MMFC,BRG&HSG, FRAME, FELT ROLLS ,FELT ,TOUCHROLL

                DOCTORS, DRIVE, HIGHVEL HOOD.  IT-250  MG CYLINDER 10FT DIA X 2200MMFC –1

IT-224     MSMG 8 FT DIA X 40”FC WITH BRG & HSG, GEAR WHEEL, PENION.

IT-241     MS  SS COATED MG 10FT DIA X 2000MMFC, 45MM CELL THICKNESS COMPLETE SET

IT-268     10 FT DX2000FC MG. IT-327 MS MG WITH SS COATED 12FT DX 1.85MMFC, 58MM, CELL THICKNESS, ALL  ACC 

IT-251     MSMG14FTDX2500MMFC,45 CELL,  IT- 323               MSMG 8FT D X 84”FC

IT-237     IMP. CI MG 8FT DIA X 65”FC, 45MM CELL THICKNESS WITH BRG HSG, GEAR WHEEL, PENION, TOUCH ROLL

IT-343     MSMG 8FT DIA X 84”FC        IT-126              CI MG 12FT DIA X 2300MMFC WITH BEARING HOUSING

IT-353     MSMG 14FT DIA X 2500MMFC    IT- 354 CI MG 3650MMFC X 11 ¾ FT DIA

IT-366     IMP. CI MG 10 FT DIA X 2000MMFC WITH ALL ACCESSORIES.

IT-368     BRAND NEW GERMANY MAKE TOUCH ROLL 700MMDIA X 3200MMFC.

IT-389     CI MG 11FT DIA, 2450MMFC, 32/35 MM CELL THICKNESS WITH FRAME, BRG HSG, TOUCH ROLL DIA 500MM,

                GEAR WHEEL, PENION, HOOD.

IT-383     MSMG 80”FC X 14FT DIA, CELL 50MM, SS COATED WITH BRG HSG & TOUCH ROLL.

IT-389     CI MG 2450MMFC 10 ½ FT DIA WITH BRG HSG, GEAR WHEEL, TOUCH ROLL, HOOD ETC.

SIZE PRESS / COATING PLANT

 IT-125    IMP. HORIZONTAL SIZE PRESS 500 MM D X  2800 MM FC

IT-229   IMP. JAGANGURB COATER 2000MMFC

IT-374     SIZE PRESS 500MMDIA X 2500MMFC, ROLL SIZE COMPLETE

IT-389     450MDIA X 2600MMFC TOP & BOTTOM.

CALANDER

IT-43      SUPER CALANDER 7 ROLLS SET,76” FACE COMPLETE SET

IT-249     CALANDER WITH FRAME / DOCTOR/ BRG – 6 ROLL SIZE 400,800,250,200 X 2000MMFC

IT-250     CALANDER 500 / 400/ 350/290  X 2640MMFC –1 IT-198  4ROLL CAL.SET 2180MMFC  

IT- JP    IMP HELTON GERMONY OPEN FRAME TYPE 500 X 350 MM DIAX 2750 MM FC

             WITH BRG & HSG PNEUMATIC, GEAR BOXES ETC COMPLETE SET,

IT- 142   IMP. SUPER CALANDER 2200MM FC WITH COTTON & CHIELD ROLLS (STEEL),             

              COTTON ROLLS - 4 NOS., ROLL DA 450, 390,340,240MM WITH 140HP DC DRIVE

                 HYDRAULIC LOADING / UNLOADING ARRANGEMENT , 4 ROLLS EXTRA

IT-171     IMP. SUPER CALANDER 2450MMFC,12ROLLS WITH STEEL &COTTON ROLLS.

IT-186   CAL.ROLLS 2180FCX435MMD KING ROLL-4 IT-260  CALANDER ROLLS 2200MMFC X 300MMDIA-3PC

IT-203   CALA.ROLLS3250FCX2”,20”,18”&18”D WITHOUTBRG/HSG,FRAME, SUPERCAL 4000FC

IT-278     2 ROLL CALANDER SET 3300MMFC.IT-212 CALANDER ROLL36”FCX12”DROLL –2

IT-217     NEW CALANDER ROLL36”FCX12FTD-2 ROLLS, FRAME,DRIVE,R-GEAR BOX-ETC-2

IT-120     IMP. CALANDER ROLL WITH BRG HSG 2500MMFC X 12” DIA –8PC.

IT-JN      CALANDER ROLL 500, 450, 350, 350MMDIA X 2050MMFC

                CALANDER SET 2250MMFC X 550, 450, 380, 350MM DIA

IT-295  2650MMFC 5 ROLL CALANDER SET, SUPER CALANDER FIBRE ROLLS  510MMDIA X 4000MMFC – 5PC.,

 3580 X 650-2PC,3865 X 450-1PC, 3900 X 500-5PC, 3300 X 650 –1PC, 3900 X 300 – 12PC, 3900 X 500 –1PC,

             3580 X 310-5PC, 3580 X 400 –1PC, 3740 X 360 –1PC, 3580 X 400 –1PC, 3940 X 360 –3PC.

IT-323     CALANDER WITH FRAME ROLL SIZE 450 X 2210MM,

IT-343     CALANDER ROLLS 450 X 2210MMFC, 450 X 2100 COMPLETE SET

IT-349     KUSTER CALANDER KING ROLL SIZE 594MMDIA X 3100MMFC , KUSTER CELL 444MM DIA X 3100MMFC

IT-359     KUSTER CALANDER, FOUR ROLL KUSTER + FOUR SWIMMING ROLL WITHOUT FRAME –2 SETS .

IT-360     CALANDER ROLLS –2, 380 X 2800MMFC.

IT-365     CALANDER ROLLS 3300MMFC X 650MMDIA, 350,350,           AC MOTOR 300HP, 1960 RPM.

IT-VK     CALANDER ROLL 700 & 350MM DIA X 2100MMFC

IT-374     5 ROLL CALANDER SET 60” FC COMPLETE WITH ALL ACCESSORIES

IT-395     5 ROLLS CALANDER 2340MMFC ROLL DIA 500, 348,340,350,422,

IT-397     7 ROLLS SUPER CALANDER ROLL DIA 275, 280,360, 275,505, 280, 390, 400, 582 X 2490MMFC.

POPE REEL:-

 IT-106  POPE REEL 2750MM FC COM.  IT- 323  810 X 2130MM SIZE POPE REEL. IT-343                POPE REEL 900 X 2100MM SIZE

IT- 123   POPE REEL1916DIA X 2793 MMFC IT-147 POPE REEL 2400 / 2500MMFC COMPLETE .

IT-JN      POPE REEL SIZE 2300MMFC X 1000MMDRUM DIA.

IT-295     2600MMFC POPE REEL COMPLETE, 3990MMFC POPE REEL WITH 1100MMDRUM DIA

IT-395     POPE REEL –900MM DIA X 2350MMFC,

SLITTER & REWINDER      

IT-203    IMP. BLACK CLAWSON REWINDER 3250MMFC WITH MOTOR ETC.

IT-326     2500MMFC REWINDER    IT- 323    86”FC REWINDER

IT-246     IMP. SLITTER REWINDER 2500MMFC, WITHOUT MOTOR.

IT-258     BRITISH REWINDER 3910MMFC, 3800MM TRIM DECKLE IN RUNNING CONDITION

IT-120     IMP. SLITTER REWINDER 2700MMFC 30KW MOTOR COMPLETE UNIT. IT-345             IMP. REWINDER 3000MMFC.

IT-15       CALCUTTA MAKE 50” FC REWINDER  IT-279          2400MMFC GURUNANAK, REWINDER

IT-304     REWINDER 2300MMFC  IT-297      REWINDER 2400MMFC IT-338       REWINDER 2200MM

IT-364     REWINDER 1650MMFC –02NOS. IT-389      COMPLETE REWINDER 2500MMFC

IT-387     IMP. REWINDER 3300MMFC, SINGLE DRUM & 3600MMFC DOUBLE DRUM

IT-394     SUD & WAREN MAKE 1000MMFC SLITTER REWINDER COMPLETE UNIT WITH

SHEET CUTTER

IT-30C      CONTINEOUS ROTARY CUTTER ,M/C , 66” FACE. IT- SJ      SIMPLEX CUTTER 55”

IT-43C      IMP. JAGENBURG CUTTER 20/25 TPD, 1400 MM FC, COMPLETE.IT-323 2300MMFC SHEET CUTTER  

IT-338     DUPLEX SHEET CUTTER 2200MM IT-259    72”FC DUPLEX SHEET CUTTER.

IT-DP     DUPLEX SHEET CUTTER 68”FC. IT-171          IMP. SIMPLEX SHEET CUTTER WITH PIV GEAR 2200MMFC

IT-JP       SIMPLEX S. CUTTER 50” FC        IT-279  J & K DUPLEX SHEET CUTTER 2200MMFC

IT-331     JAGANBURG SHEET CUTTER 1400MMFC, IT-362 DUPLEX SHEET CUTTER 2700MMFC

IT-364     SHEET CUTTER 1250MMFC

MOULD & FORMER  

IT-177   MOULD WITH VAT-2800MMFC X 4FT D-2

IT-262     MOULD 42” X 42” SIZE – 1PC. IT-237           SS MOULD WITH MS VAT 2 X 1 MTR SIZE –3.

IT-120    EXTRACTION SS MOULD 800MMDIA X 2700MMFC WITH BRG HOUSING –3PC.

SUCTION RETURN ROLL DRUM 30” DIA X 2600MMFC – 1PC.

IT-297     MOULD VAT MS, SUITABLE FOR 1250 X 3150MM FC MOULD –7NOS., MS VAT

              SUITABLE FOR 1250MMDIA X 2400MMFC –2PC., SS VAT 2800MMDIA X 2070MM HT

IT-354     SS FORMER 2400MMFC WITH VAT COMPLETE –6NO., MOULD IN BRONZE 1000MMDIA X 2600MMFC –3NO.

IT-378     SS MOULD WITH COUCH ROLL 54” FC-2NOS.

PUMP&VACCUMPUMP

IT-279 VACUUM PUMP KAKATI MAKE 29M3/MN –3PC. , IMP. PUMP –2PC.

IT-210     KAKATI VACU.PUMP 300KVA,FAN PUMP150X125 IT-120 600 KVM KAKATI V PUMP.

IT-170    VACUUM PUMP KVM -200-3PC, *WATERPUMP,KIRLOSKAR,27.78 L/S,98MH,29RPM-1

IT-187    KAKATI 3000KVM VACUUM PUMPS,75HP MOTOR-1, IT-JP                PUMP 3X3” SIZE – 2PC.

                 10HP MOTOR.**AD COMMTATOR COUPLING MOTOR 40HP GREAVE MAKE -2PC.

IT-95     VACUUM PUMP KVM-200-3PC, WATER PUMP KIRLOSKAR 28L/SEC,98MH,2900 RPM

IT- 142   FAN PUMP -500M3 HR IT- SJ VACUUM PUMP 400KVM, KIRLOSKAR STOCK PUMP,

IT - SJ     VACUUM PUMP LOBE TYPE IMP, TWO IMMPELLAR SPLIT CASE PUMP,

IT-177     KAKATI VACUUM PUMP 300 KVM –1PC   IT-235    VACUUM PUMP 10, 20, 25 HP

IT-15       210KVM VACUUM PUMP –2   IT-294           STOCK PUMP 280M3, 30MTR HEAD –6 PC. IT-360 10” X 8” PUMP –01NO.

IT-379     SS FAN PUMP, SCAN NO. 313167, TYPE BA 300 X 300-40, 1440 RPM, 140M3/HR CAPACITY,30 MTR HEAD-2

BOILER    

IT-185    MTB-60 MODEL, 6 T/HR CAP. THARMAX.

IT-218     THERMAX BOILER –6T/HR   IT-294 FD FAN SUITABLE FOR 6TPH BOILER

IT-227    NEW  INDICO3T/HR WATERTUBE –3PASS, IT-130B 6 T/HR PRESSURE VESSEN.

IT-228     SMOKE FIRE 1.5 T/HR CAP. BOILER  IT-269               STOCKER BOILER (BNW ) 5 TPH CAP.

IT-237     REVOMAX- AUTOMATIC PACKAGED STEAM GENERATOR, MODEL RX-A 06/1323,YEAR 1997, 600KG/HR -2

                AUTOMATIC STEAM BOILER MODEL MRS-02, 1995 YEAR 200KG/HR CAPACITY.

IT-296     12 & 10 TPH THERMEX BOILER FBC IT-374               8TPH FBC KVSL BOILER COMPLETE.

IT-371     THERMEX BOILER MXF 20, 2 TON/HR CAP, 1996 YEAR MAKECOMPLETE

IT-375     FBC, IJT BOILER 25 TPH, 14KG/CM2, PRESSURE COMPLETE BOILER.

IT-393     10 TPH CAPACITY BNW COMPANY FBC WATER TUBE, PRESSURE 10 ½ KG COMPLETE UNIT.

TURBINE                                             

IT-340     4.5 MW TURBINE, BACK PRESSURE PUMP CONDENSING METRO POLITANVICKERS CO, ENGLAND, LTD

IT- 358    3 MW POWER PLANT TRIVENI MAKE EXTRACTION CONDENSING TURBINE WITH THERMEX BOILER 32 TPH

                PRESSURE 45 KG / CM2

DG SET 

IT-204     D.G.SET IMP GERMONY MODEL1973,MANCO &ALTERNATOR SIEMAN1200KVA - 2

IT-371     687.5KVA DG SET

ELECTRICALS -

IT-371     125HP & 100HP SLIP RING 960 RPM

IT-SJ         FD FAN,FLNAGE MOUNTING MOTOR 40HP, 300HP AC MOTOR,  IT-338        DC MOTOR 100HP

IT- 30W  MOTORS 10, 12.5 ,15, 50 HP. IT-235 30HP DC MOTOR.

IT-45M   DC MOTOR, GEAR-3.5KW/2850 RPM, AC SLIP RING 60/960, 45/1440,INDUCTION

               MOTOR-7.5 KW/960, 6.6KW/1440  AND CONTROL PANNEL OF THERMAX BOILER.

IT- 142   200HP AC MOTOR,140HP DCMOTOR, 300HP AC MOTOR IT-178 33 5HPDC MOTOR-3.

IT-249    100HP DYNA DRIVE, 120-1200 RPM CLARK & VICARIO MAKE DECULATOR,

 CLEANER SYSTEM 34000 LPM BEARING HOUSING, SLEEVERS, 22324K BEARING - 28

IT-185    100HP EDDY CURRENT DRIVE, 45 HP DC DRIVE, IT-181A *KIRLOSKAR , DC MOTOR 60HP(0-1500 RPM)

IT-294    DC MOTOR 45HP                                IT-363    45HP DC MOTOR.

IT-226     DC MOTOR 375,200,350HP, TRANSFORMER 2000KVA/33, AC MOTOR 200 & 150HP IT-235 30HP DC MOTOR 

IT-271     AC & DC– 100,C125,C150,200,360,390HPIN LOTS. IT-242  KIRLOSKAR,TRANSFORMER 5000KVA ,33000.

IT-272     DC MOTOR 300HP (0-1500 RPM)- 1PC, DC  MOTOR 30HP –2, DC MOTOR 60HP –1PC.

IT-317     300HPDC MOTOR, PANNEL, 75HP DC MOTOR,PANNEL, AC INDUCTION MOTOR 150HP

WIRE, FELT ROLL & FELT  IT-120    FELT ROLL205DX2825FC-20 

IT- JP    8”DX2770FC ,BRG,HSG-25 IT- 80 FELTROLL100,150,200DX2200FC HUGE QTS

IT-45     TAMBOUR ROLL240DX 2340MMFC.OL-3020-13PC IT-120  FELTROLL205DX2825MMF-20

IT-267     FELT ROLL 6” X 2800       IT-120      FELT ROLL 210MMDIA X 2800MMFC –15PC.

IT-177 FELT ROLLS 185” DIA X 3000MM FC WITH ABONITE COATED -40PC. & 200MMDIAX 2850MMFC-20PC.

IT-244     FELT ROLL 72”FC X 150MMDIA – 20PC.IT-294          200MMDIA X 2500MMFC –7PC.

 IT-360    FELT ROLL190MM DIA X 3000MMFC -04

IT-323     FELT ROLL 175MMDIA X 86”FC – 30PC., PAPER ROLL 4” DIA X 86”FC –3PC.

IT- 299    WIRE PART BEAM WITH SLOT AND WIRE RETURN ROLL SUITABLE FOR 23.6 X 2650MM SIZE WIRE.

IT-363     FELT ROLL 150, 160, 190MMDIA X 2400MMFC –25NOS, TABOO ROLLS 215MMDIA X 2320MMFC –12NOS.

IT-374     FELT ROLL 230 X 2925MM-10NO. IT-389 6”,8” DIA X 2600MMFC FELT ROLL- 20PC.

IT-402     FELT ROLL 185MM DIA X 2250MMFC –8NO., 260MMDIA X 2330MMFC –7NO.

TABLE ROLLS IT-267   TABLE  6” X 2800MM

IT-234     TABLE ROLL 130DX 3500MFC,JOURNAL D30,BEARING NO1307K,BRGCENTRE3800 - 7

IT-374     TABLE ROLL 130 X2872MM –10NOS. IT-323 6” DIA X 86”FC TABLE ROLL – 4

COMPRESSOR :

IT-170     NEW COM.-  KNR, MODEL – KS  D22, 45CFM, 15HP  IT - 95 TWO STAGE AIR COM.KDS 

IT-210     VERTICAL COMPRESSOR INGERSOLL 7 X 5, DISCHARGE 100PSIG

IT-349     ELGI MAKE COMPRESSOR 26.57, 22.5, 26.57,605, 15.12 M3 / HR INGERSALRAND IMP. 250CMC CAPACITY  

AGITATORS AND GEAR BOX  & OTHERS                    

IT-SJ GEAR BOX 10:1RATIO     IT-235 R- GEAR BOX 1: 30

IT-170  R. G. BOXES, RE DICO -3PC,U-800RATIO 10:1L,U-800, RATIO 7.5: 1L,U-700, RATIO 20:1L

IT-142  R.G.B., NEW 10:1 RATION ELECON,    IT-260  WORM GEAR BOX 1:5 RATIO

IT-235 REDUCTION GEAR BOX 1: 30  IT-249  RED. GEAR BOX MODEL-1000, RATIO 50 :1 L

BLEACH -WASHERS

IT-108   KAMYAR WASHERS 3250DX4000MMFC,IN SS -5PC, IMPCO SS 8FTD X 16FT FC-2PC

IT-125   IMP. IN SS 1500 MM D X 2500FC, 50TPD VACUUM WASHER/FILTER IT- 108 SS BLEACH PULP CONVEYOR.

IT-178   DOOR OLIVER BS WASHERS 6X5FTSIZE–3

IT-242     30 TPD BLEACH FILTER, KMW MAKE IN SS, 1.75 MD X 1.25MFC – 4PC.

                70 TPD BLEACH FILTER, KMW MAKE IN SS, 1.5 MD X 3.2MFC – 1PC.

                30 TPD CAP. BLEACH FILTER, FRONT SCREW CONVEYOR – 4PC.

                30 TPD BLEACH FILTER / MIXER INCLAINDE CONVEYOR – 3PC.

                100TPD BLEACH FILTER MTE MAKE IN SS 7.5 FT DIA X 14FT FC –3PC.

                70 TPD BLEACH FILTER KMW MAKE IN SS 2MD X 3.5MFC – 1PC.

                70TPD BLEACH FILTER KMW MAKE IN SS 1.5MD X 3.2MFC –1PC.

IT-269     BS WASHERS MS 8 X 8 FT SIZE – 2, IT-260 30/40 TPD, NEEDER COMPLETE

IT-305 BROWN STOCK WASHERS JOHNSON MAKE 1000MM WIDTH, 8MM PERFORATION –3

            BROWN STOCK WASHERS HDO MAKE 8FT X 10FT  SIZE –3PC., WASHER DRUM HDO

            MAKE 8FT X 10FT SIZE –2PC., HD TOWER CONVEYOR WITH ENDLESS RUBBER BELT

            650MM X 39MTR LONG, 650X38.5MTR, 650X 11.5MTR, BLEACH WASHERS COMPLETE

            HDO MAKE 9 ½ X 10FT –5PC., NEW BROWN STOCK WASHING UNIT HDO MAKE –3NOS.

 STATIC MIXER NITTOR ASSOCIATED DESIGN 300 X 3600MM-1, HEATER MIXTER (ALKALI MIXER) HDO MAKE , HD TOWER HEATER MIXER , PRIMARY THICKNER &

SECONDARY THICKNER COMPLETE UNIT VOITH MAKE 2-1 NO., NEW BROWN STOCK DECKER EMICO KCP LTD 10FT X 16FT –1, HDO MAKE 9 ½ FT X 16FT –1, SCREW CONVEYOR COMPLETE SET 300MMDIA X 6000 LONG, NEW DECKER FEED SCREW CONVEYOR 300MMDIA X 12000 LONG, CENTRIFUGAL SCREEN PRIMARY, SECONDARY, TERTIARY VOITH DESIGN –3-2-2 NO.,

IT-345     B.S. WASHERS 8 X 8 SIZE, 6 X 8SIAE, 3.140M X 3.0MMFC

IT-410     DOOR OLIVER WASHERS 8FT X8FT SIZE –02NOS.

IT-362     PUMPS, BLOW TANK-2, TWIN DRUM FILTER, POCHER WASHER 3 & 4,  B.S. WASHERS, HEATER MIXTURE, COWN SEREEN, STRAW CENTRICLEANERS, STRAW THICKNER, COLORINATION MIXTURE, ALKALI TOWER

                CLORIN WASHERS, HYPO WASHERS, AGITATORS, PUMPS,

IT-364     80 M3 VERTICAL SULPHATE DIGESTOR, BLOW TANKS250M3 CAPACITY,

                BS WASHERS HDO MAKE 8 X 10 FT FC SIZE –01NO, BLEACH WASHERS 8 X 10 FT SIZE –05NO, VOITH MAKE

                SS CLEDED 3300MMFC HEAD BOX, HYDRA PULPER 14M3, HEATER MIXTURE, TOWER AGITATORS, CF SCREEN, CC UNIT, SCREW CONVEYOR.

IT-237     PAPER MILLQCS SYSTEM- MEASURES REX QUALITY CONTROL SYSTEM, “O” FRAME 3.75MTR RS WIDTH BASIS WEIGHT AND MOISTURE MEASUREMENT .

IT-220     BRAND NEW APPOLLO SHORT WAVE IN FRARED DRYERS SUITABLE FOR

         MOISTURE PROFILE CONTROL ON PAPER MACHINE COMPLETE WITH – 3MTR DECKLE

GENERAL   IT-45  HOOD BLOWER EXHUST FAN OF 1100- 3 IT-276 DRY.G.WHEEL5FTD – 15

IT-SJ-  25T COAL CRUSHER IT-268 LINE SHAFT, DRIVE, DC & AC MOTOR.

IT-185     LINE SHAFT , CONEPULLEYS, JACK SHAFT WITH CONEPULLEY, POPE REEL ARMS.

IT-108   WATER SEPRATOR TANK-2PC,SS CHEMICAL PREPRATION TANK.

IT-15       DRYER GEAR WHEEL-15PC, MACHENICAL CLUTCH UNIT WITH GEAR BOX & BELT

SHIFTNER – 6PC, SUCTION BOXES –4, , REDUCTION GEAR BOX 10:1 RATIO ,

BLOWER, SDR, POCHER WASHING DRUM, POCHER , AGITATORS,

IT-181 ELECTRIC HOIST 3 TON CAP.IT—JP PRESS VACUUM TUBE 125H X150W X 3000L-1

IT-JN      SS HYDRA FOILS 2300FC–15, SS HYDRA FOIL BOX 2300FC – 3, SS VACUUM TUBES 2300FC –6,CONPULLEYS.

IT-282 BILL BLADE BLACK CLAWSON COATER 2500MMFC

IT-285     LINE SHAFT100MTR, FLAT PULLEY1500D.IT-288 IMP. AUTOMATIC BOX MAKING MACHINE SIZE 48” X 84”

IT-292     OVER HEAD CRANE 7.5 TON CAPACITY, NEW CONVEYOR BELT 600MM W X 100MTR

IT-294     LINE SHAFT &CONPULLEY OF DIFFERENT SIZES.IT-279 WEIGHING SCALE 30 TON

IT-242     CIRCULATION SCREW TATA KMW CT–3 –1 & CT – 4 – 2,JAIMPEX MOTORISED  PIV GEAR BOX, PIV / 211/5-2, PIV 2/2116-2, SHANTI GEAR, SAN – 25 RATIO 3:15:1 – 3NOS, IIDOCL2 MIXTURE & CL2 DISPERSER 18” DIA , CL2 MIXTURE WITH RUBBER LINE 120 TPD, GEAR BOXES RADICON U-800 12:75:1 – 1NO., U 600 RATIO 2:1 –7, U400 13:1 –4NO., U-600 RATIO 13:1-3NO, KIRLOSKAR PUMP 4NK, -125,  35LPS-1, KMW 10X8 , 1500LPS-2, KIRLOSKAR 3UP3M,63 LPS, KIRLOSKAR 8UP2M, 130LPS, KIRLOSKAR 4UP –3 CAP. 41LPS, STOCK PUMP 10:8 –2 &8:5-4PC.

IT-299     BAGASSE DEPITHER 10T/HR, BALE BREAKERS, BAGASSE CHAIN CONVEYOR 10T/HR CAPACITY,

IT-330     IMP. HOIST 10MT, IMP. PUMP 125X150,150X150,40X30MM,125X100MM,R1 CON.REFINER –2, AIR COMPRESSOR.                    

IT-349     DYNACON MAKE SLATE CONVEYOR

IT-349     ELGI ,AIR COMPRESSOR 26.57,22.5,26.57,26.57,605,15.12, M3 / HR, INGER SALRAND IMP. 250CMC COMPRESSOR.

IT-331     FN PUMP 14V P2Q  VACCUM PUMP.           IT-374    LUMB BREAKER ROLL 60”FC

IT-363     LINE SHAFT 80MMDX10MTR LONG, CONEPULLEYS, POPE REEL ARMS, BAGGASSE BALE BRAKER 8/ 10 TPH 

IT-396     WIRE ROLL SHAKE, VACCUM PUMP 600,150,300,200KVM-ROLL 500 MMDIA X 2800MMFC-1,STONITE 490MMDIA

X 3800MMFC –1,TOUCH ROLL 510MMDIA X 3600MMFC-1,ABONITE 490MMDIA X 2717-1,ABONITE 490 X 2900 –1, ABONITE 490MMDIA X2850MMFC –1,TABLE ROLL 140 X 3000MMFC –3,FELT ROLL 230 X 2850MMFC –11,

GEAR BOX VERTICAL TYPE –2

IT-407     BAGGASE BILL BREAK 12 TPH. MOIST DEPITHER 12TON PER HOUR CAPACITY.

IT-416     JAPAN MAKE 50 / 60 TPD NEW IN RUNNING CONDITION HOT DISPERSOR

IT-417     CI DRYERS 1500MM DIA 2750MMFC –02NOS, TURBO T –400 –01NO,DC MOTOR

                250KW, CONEPULLEYS 560 X 750 X 400-5NOS, 800 X 750 X 400-02NOS, 795 X 753 X

400 – 02 NOS, AIR PRE HEATER, DUST COLLECTOR, WIND BOX, ET PLANT FLOATING

DE – AREATOR, DDR –2, TDR 21” SIZE –2, AUTOGUIDE –01, VACUUM PUMP 300 –01,

POPE REEL DRUM 900 X 2750, DRYERS GEAR AND FRAME, FBC BOILER 6 & 3 TPH

                COAL HANDLING PLANT.

WE ALSO WANT TO INFORM YOU THAT WE ARE DEALING ON COMMISSION BASIS  5% ON FINAL

SETTLEMENT. IF YOU ARE INTRESTED YOU CAN INSPECT THE PLANT AT ANY TIME BY PRIOR INTIMATION / APPOINTMENT TO US IN ADVANCE AT YOUR COST AND WITH OUR SERVICE CHARGES ALSO.

                                IF YOU ARE INTRESTED TO SALE / PURCHASE YOUR PLANTS/COMPONENTS PLEASE SEND YOUR LIST WITH DETAILS AND TENTATIVE PRICE ALSO.

                                THANKING YOU,

                                YOURS FAITHFULLY,

                                 S.P. VERMA